Splat Quick Viewer

3DGS のファイルを、ブラウザでさっと確認して整える

Check and tidy 3DGS files, right in your browser

Splat Quick Viewer は、3D Gaussian Splatting のファイル(PLY・SPZ・SOG・.splat)を開いて中身を確かめ、不要なスプラットの選択と削除、トリミング、向きの修正、別形式への書き出しまでを 1 ページで行えるツールです。インストールは不要で、ファイルが外部に送られることもありません。

Splat Quick Viewer opens a 3D Gaussian Splatting file (PLY, SPZ, SOG or .splat) so you can inspect it, select and delete unwanted splats, trim it, fix its orientation and export it in any of those formats, all on one page. Nothing to install, and your file never leaves your device.

ビューアを開くOpen the viewer Mac・Windows のブラウザと、スマートフォンのブラウザで動きます。 Runs in desktop browsers on Mac and Windows, and in mobile browsers.
Splat Quick Viewer の画面。左にツール、右に設定のタブ、中央にスプラットThe Splat Quick Viewer screen: tools on the left, tabbed controls on the right, the splat in the middle

実際の画面。左にツール、右に設定のタブ、紫のボタンでギャラリーに保存します。

The real screen. Tools on the left, tabbed controls on the right, and the purple button saves to your gallery.

なぜ作ったか

Why it exists

3DGS の PLY は数十〜数百 MB になることが多く、「ちゃんと出来ているか」を確かめるだけでも専用のアプリを立ち上げる必要があります。作ったばかりのファイルや受け取ったファイルについて、まず知りたいのは次のようなことです。

  • 壊れていないか、何個のガウシアンがあるか、SH は何次か
  • どのくらいの広さで、どちらが上を向いているか
  • 背景や浮遊物など、不要な部分がどれくらい混ざっているか

これをブラウザでファイルを落とすだけで確かめられるようにしたのが Splat Quick Viewer です。確かめたついでに、浮遊物などの不要なスプラットを選んで消し、範囲を切り落とし、向きを直し、軽い形式で保存するところまでをその場で済ませられます。

3DGS PLY files often run from tens to hundreds of megabytes, and just checking whether one came out right usually means launching a dedicated app. For a file you have just made or received, the first questions are simple:

  • Is it intact, how many Gaussians does it hold, and what SH degree?
  • How large is the scene, and which way is up?
  • How much background or floating debris is mixed in?

Splat Quick Viewer answers these by dropping the file into a browser. While you are there, you can select and delete floaters and other unwanted splats, cut the scene down to a range, fix the orientation and save in a lighter format.

できること

What it does

見るファイルをドロップするとスプラットとして表示。マウスで回転・移動・ズームし、WASD で歩き回るように見られます。
情報を確かめるガウシアン数、SH 次数、プロパティ数、範囲、ヘッダーのコメントを左上に表示します。
向き・位置・サイズ色の輪で回し、矢印で動かし、白い円で拡大・縮小。高さを数値で指定することも、中心を原点へ・下端を地面へもワンタッチです。
選択して削除矩形・投げ縄・ブラシで選ぶほか、スポイトで同じような色をまとめて選べます。元に戻す/やり直しもできます。
トリミングX・Y・Z の範囲と不透明度のしきい値で、不要な部分をその場で切り落とします。
書き出しと変換編集・トリミング・向きの調整を反映して保存。PLY・圧縮 PLY・SPZ・SOG・.splat のどれにも書き出せます。
自分のギャラリー仕上げた作品をタイトルとメモ付きでブラウザに保存し、公開オンの作品だけを HTML 付きのギャラリーとして書き出せます。
一覧表に書き出すギャラリーの作品を、サムネイル・元データの場所・属性つきの Excel(または CSV)の表に。たくさんのスプラットの整理台帳になります。
ViewDrop a file to see it rendered as splats. Orbit, pan and zoom with the mouse, or fly through with WASD.
InspectGaussian count, SH degree, property count, bounds and header comments appear at the top left.
Orientation, position and sizeRotate with coloured rings, move with arrows, resize with a white circle or type an exact height. Centre to origin and bottom to ground in one click.
Select and deletePick splats with a rectangle, lasso or brush, or grab every splat of a similar colour with the picker. Undo and redo included.
TrimCut away unwanted parts live with X, Y, Z ranges and an opacity threshold.
Export and convertSave with your edits, trim and orientation applied, as PLY, compressed PLY, SPZ, SOG or .splat.
Your own galleryKeep finished pieces in your browser with a title and note, then export the public ones as a gallery with its own HTML.
Export a listTurn your gallery into an Excel (or CSV) table with thumbnails, original data locations and details: a ledger for a large collection of splats.

使い方

How to use it

  1. ファイルを開く

    Open a file

    ビューアにファイルをドロップするか、ファイルを開く で選びます。フォルダーを選ぶと、中のスプラットが一覧になります。

    Drop a file on the viewer or use Open a file. Pick a folder to list every splat inside it.

    フォルダーの中のスプラットの一覧The list of splats in a folder
  2. 見て回る

    Look around

    操作マウスタッチ
    回転左ドラッグ1 本指
    移動右ドラッグ/Shift + ドラッグ2 本指
    ズームホイールピンチ
    歩き回るW A S D・Q E(Shift で速く)—
    全体表示ダブルクリック/F全体表示
    ActionMouseTouch
    OrbitLeft dragOne finger
    PanRight drag / Shift + dragTwo fingers
    ZoomWheelPinch
    FlyW A S D, Q E (Shift: faster)—
    Fit to viewDouble-click / FFit to view
  3. 向き・位置・サイズを直す

    Fix orientation, position and size

    左の 回転(T)は色の輪、移動(G)は矢印、サイズ(K)は白い円をドラッグ。⌘/Ctrl で刻みごとに止まります。

    Drag a coloured ring with Rotate (T), an arrow with Move (G), or the white circle with Size (K). Hold ⌘/Ctrl to snap in steps.

    回転ツールの色の輪The coloured rings of the Rotate tool
  4. いらない部分を選んで消す

    Select and delete what you don't want

    矩形・投げ縄・ブラシ でなぞるか、スポイト(I)で色をクリックすると黄色に。下の赤い 選択を削除 で消えます。スポイトは 色の近さ で選ぶ幅を調整できます。

    Trace with Rect, Lasso or Brush, or click a colour with the Picker (I), and the splats turn yellow. The red Delete selected removes them. Colour range widens or narrows what the picker takes.

    スポイトで葉の色を選び、黄色になったところ。下に操作バーThe leaf picked by colour with the picker, shown in yellow, with the action bar below
  5. 切り取って書き出す

    Trim and export

    切り取り タブのスライダーで残す範囲(黄色の枠)を決め、書き出し タブで形式を選んで保存します。

    Set the range to keep (the yellow box) on the Trim tab, then pick a format and save on the Export tab.

    切り取りタブのスライダーと黄色の枠The Trim tab sliders and the yellow box

対応している形式

Supported formats

形式読み込み書き出し
PLY(標準)○ binary little endian。プロパティの並び順は問いません○ プロパティ構成と SH 係数は元のまま
圧縮 PLY○ SuperSplat / PlayCanvas の形式○
SPZ○ バージョン 2〜4○ バージョン 3
SOG○ バージョン 2・3○ バージョン 2(SH 係数なし)
.splat○○ (形式上 SH 係数なし)

ASCII 形式の PLY には対応していません。

FormatReadWrite
PLY (standard)Yes. Binary little endian, properties in any orderYes. Property layout and SH coefficients kept as they are
Compressed PLYYes. The SuperSplat / PlayCanvas formatYes
SPZYes. Versions 2 to 4Yes. Version 3
SOGYes. Versions 2 and 3Yes. Version 2 (no SH coefficients)
.splatYesYes (the format has no SH coefficients)

ASCII PLY is not supported.

知っておくとよいこと

Good to know

ファイルは外部に送られません。読み込んだファイルとギャラリーは、お使いの端末のブラウザの中だけで扱われ、サーバーへアップロードされることはありません。ツールの改善のため、使われた回数だけを数えています(利用回数の計測)。

Your file stays on your device. Files and your gallery are handled entirely inside your browser and are never uploaded. To improve the tool, only usage counts are recorded (usage counts).

利用回数の計測について

About usage counts

どれくらい使われているかを作者が知るために、次の出来事が起きた回数だけを、作者のサイト(splat.radiancefields.net)に送っています。

So that the author can see how much the tool is used, only the number of times these things happen is sent to the author's site (splat.radiancefields.net).

更新履歴

Version history

バージョン番号は 1.5.0 から付け始めました。それより前の番号は、追加した順にさかのぼって割り当てたものです。いまお使いの版は、ビューアの設定パネルのいちばん下に小さく表示されます。

Version numbers start with 1.5.0; earlier numbers were assigned afterwards in the order features were added. The version you are running is shown in small type at the bottom of the viewer's control panel.

1.6.1
2026-11-16
使われた回数だけを数える仕組みを追加(ファイル名や中身は送りません。利用回数の計測について)。
1.6.0
2026-11-16
サイズ(拡大・縮小)ツールと、色の近いスプラットをまとめて選ぶスポイトを追加。高さを数値で指定することもできます。Excel の一覧表にサムネイルを入れるように。紹介ページを実際の画面のキャプチャ付きに。
1.5.0
2026-11-16
メニューを組み替え(左にツールバー、下に操作バー、右の設定をタブ式に、ギャラリーを紫で表示)。フォルダーを開いて階層つきの一覧から選べるように。ギャラリーに元データの場所・ファイル名・サイズ・更新日時を記録。ギャラリーの一覧表を Excel(.xlsx)/CSV で書き出し。バージョン番号を表示。
1.4.0ギャラリーの全作品バックアップと zip からの読み込み。一覧のグリッド/リスト切り替え。Safari でギャラリーのデータが読めなくなる問題を修正。
1.3.0ギャラリー:作品をブラウザに保存し、カテゴリー・タグ・撮影日などの属性を付け、公開オンの作品を HTML 付きのフォルダとして書き出し。
1.2.0矩形・投げ縄・ブラシで選んで削除(元に戻す/やり直す)。SPZ・SOG・.splat の読み書きに対応。
1.1.0WASD での移動、回転ツール・移動ツール、中心を原点へ・下端を地面へ。日本語/英語の切り替えと紹介ページ。
1.0.0最初の版。PLY・圧縮 PLY の表示、情報の表示、範囲と不透明度でのトリミング、向きの修正、書き出し、スマートフォン向けの表示。
1.6.1
2026-11-16
Usage counts only (no file names or contents; see About usage counts).
1.6.0
2026-11-16
New Size tool (scale up or down, or set an exact height) and a colour Picker that selects every splat of a similar colour. Thumbnails in the Excel list. This page now shows screenshots of the real screen.
1.5.0
2026-11-16
Reorganised menus (toolbar on the left, action bar at the bottom, tabbed controls on the right, gallery in purple). Open a folder and pick from a list that keeps the folder hierarchy. The gallery records each original's location, file name, size and modified time. Export the gallery list as Excel (.xlsx) or CSV. Version number shown.
1.4.0Back up every gallery item and load a gallery back from a zip. Grid / List switch. Fixed gallery data becoming unreadable in Safari.
1.3.0Gallery: keep pieces in the browser with category, tags, shot date and other details, and export the public ones as a folder with its own HTML.
1.2.0Select with a rectangle, lasso or brush and delete, with undo and redo. Read and write SPZ, SOG and .splat.
1.1.0WASD movement, Rotate and Move tools, centre to origin and bottom to ground. Japanese / English switch and this page.
1.0.0First version. View PLY and compressed PLY, show file info, trim by range and opacity, fix orientation, export, phone layout.

ライセンスと利用について

Licence and terms

組み込んでいるソフトウェア

Included software

SPZ バージョン 4 の読み込みに fzstd 0.1.1 を組み込んでいます(MIT License)。それ以外に外部のライブラリは使っていません。

The viewer embeds fzstd 0.1.1 (MIT License) to read SPZ version 4. No other outside libraries are used.

fzstd — MIT License
Copyright (c) 2020 Arjun Barrett

Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.